Thermal clarity
Publish infeed, air and core targets with probe positions so −18 °C claims are not inferred from door gauges alone.
Agronomy Specs
Use these tables to compare belt loading, dwell, evaporator duty and hygiene boundaries before freezing fruit, vegetables or prepared foods sourced from field, greenhouse or RAS-adjacent processors.
Every JBT Agronomy Specs sheet states the product, method, acceptance limit and owner. A number without those four fields is a conversation starter, not a purchase claim.
Publish infeed, air and core targets with probe positions so −18 °C claims are not inferred from door gauges alone.
Map zone boundaries, CIP coverage and CCP calibration intervals against HACCP and GLOBALG.A.P. audit questions.
Size ammonia/CO₂ plant, power and drains against simultaneous freezer, glaze and cold-store loads.
Name who approves belt, refrigerant strategy or packaging takt substitutions after release.
| Decision | IQF tunnel | Spiral freezer | Blast cell |
|---|---|---|---|
| Typical-fit product | Free-flowing pieces (peas, berries, diced veg) | Trays, bags, irregular meal packs | Batch trolleys, low-volume SKUs |
| Primary metric | kg/m² loading & fluidization | Dwell minutes & tier clearance | Trolley count & pull-down time |
| Hygiene access | Belt lifts, CIP spray arcs | Cage walkways, belt removal path | Room finishes, door seals |
| Footprint driver | Length vs belt width | Cage diameter & height | Room volume & airflow |
| Example planning band | 450–12,000 kg/h discussion range | Tray height 20–60 mm review | −35 to −40 °C air window |
| Upstream variable | Why it hits the freezer | Spec field to capture |
|---|---|---|
| Drip vs center-pivot irrigation residue | Soil and microbial load change washer and blancher duty | Wash CCP turbidity / chlorine residual |
| Venlo / polycarbonate greenhouse harvest windows | More even piece size can raise IQF loading safely | Piece size distribution (mm) |
| RAS-adjacent herb or aquaponic greens | Moisture and delicate leaves limit fluidization aggression | Max air velocity & layer depth |
| Fertigation schedule swings | Sugar/nitrate shifts alter freeze point and sticky behavior | Brix / solids % at intake |
| Interface | Required input | Acceptance example |
|---|---|---|
| Blancher → freezer | Exit temp, moisture %, hold time | Moisture ≤ stated % before belt |
| Freezer → glaze | Surface temp, residence, pickup % | Glaze within ± agreed % |
| Freezer → pack | kg/h vs bagger cycles | No surge beyond buffer minutes |
| Freezer → cold store | Pallet rate, door openings | Core stays ≤ −18 °C at audit |
Ranges are planning aids. They do not replace product trials, CE conformity assessment for the supplied machine scope, or site-specific HACCP validation. When comparing drone-scouted field lots versus boom-sprayed acreage, update pesticide residue testing cadence in intake specs—those agronomy choices feed the same freezer hygiene story.
| Decision | Side A | Side B | What JBT requires on the RFQ |
|---|---|---|---|
| IQF tunnel vs spiral freezer | IQF: Higher free-flow piece quality and glaze control when fluidization is stable; weaker on trays and sauce splash. | Spiral: Better dwell for meal packs and irregular heights; weaker sanitation access and higher footprint height risk. | Piece/tray dimensions, target kg/h, dwell minutes, CIP access photos, packaging cycles/min |
| Drip irrigation vs center pivot feedstock | Drip: Lower soil splash and often tighter piece-size windows into the washer; higher emitter maintenance burden upstream. | Center pivot: Lower labor for large fields; higher wash CCP turbidity risk into the blancher/freezer chain. | Wash turbidity / chlorine residual limits, harvest window, Brix/solids % at intake |
| Drone scouting vs boom spray programs | Drone: Flexible on fragmented fields; residue sampling cadence must still match freezer intake CCPs. | Boom: Higher throughput on large rectangles; drift control and rate maturity remain the audit focus. | Pesticide residue test frequency tied to freezer release lots—not just field maps |
Send the tables you already use internally; JBT will mark gaps rather than overwrite them with marketing ranges.